 |
| Meaning | TMU-ZK50-30 |
| T | Code of enterprise |
| M | Anti-corrosion and abrasion resistance |
| U | Engineering plastic |
| ZK | Impurity pump |
| 50 | The inlet dia is 50mm |
| 30 | Nominal dia of impeller is 30mm |
一、Product Introduction：
Features：
1.Strong abrasion resistance：All flow parts are made from stainless steel lined with UHMW-PE. Abrasion resistance of UHMW-PE material leads the rank of all plastic materials, which four times higher than Pa66's and PTFE’s, seven times to ten times higher than cabon steel’s and stainless steel’s.
2.Strong feature of resistance to shock：The impact strength of UHMW-PE is in the first place of general engneering plastic materials, which is five times higher than ABS, and can keep stable even though in the environment of 196℃ below zero.
3.Superor anti-corrosion：The pump can transfer any kinds of corrosive medium(acid, alkali, salt) and organic solvent under certain temperature and concentration.Because of the stable chemical performance of UHMW-PE, this pump can be used on food industry as well.
Application：
1.Fertilizer industry：slute acid, waste water, sea water, fluorosilicic acid，phosphric acid fluid, etc, transfering
2.Non-ferrous metal smelting industry
3.Chemical industry：all kinds of pure liquids or fluids of sulfuric acid,hydrochloric acid,alkali, oil.
4.Chlor-alkali industry
5.Water treatment industry：pure water, high purity water, waste water, etc.
Performance range：design pressure：1.6Mpa、flow:2-3000m3/h、head：12-125m、power：1.5-750kw
Applicable temperature：-20～90℃, can be up to 180℃ if using new type material.
NOTES: No idling running. Please indicate during ordering if the proportion of medium is largger than 1.3mg/cm3.
二、Structure drawing
| Part | Material | Part | Material | Part | Material |
| 1.front pump cover | UHMWPE/lined HT200 | 9.sealing assembly | UHMWPE/lined HT200 | 17.back bearing | Gcr15 |
| 2.impeller nut | UHMWPE | 10.gasket | PTFE | 18.gland of back bearing | HT200 |
| 3.lock nut | HT200 | 11.shaft sleeve | silicon nitride | 19.diaphragm | 304 |
| 4.pad | fluorubber | 12.blocking-acid ring | fluorubber | 20.electric coupling | 45# |
| 5.impeller | UHMWPE | 13.gland of front bearing | HT200 | 21.shield | 304 |
| 6.pump body | UHMWPE/ lined HT200 | 14.front bearing | Gcr15 | 22.pump coupling | 45# |
| 7.cooling water faucet | plastic or copper | 15.pump shaft | 45# | 23.base plate | HT200 |
| 8.gasket | fluorubber | 16.bearing box | HT200 | 24.motor | per client request |
三、Performance Curve：
四、Performance data sheet：
| Type | Flow m3/h |
Head m |
Inlet mm |
Outlet mm |
NPSH m |
Speed r/min |
Power kw |
Weight Kg |
| TMU-ZK40-20 | 5 | 22 | 40 | 32 | 3 | 2900 | 3 | 100 |
| 10 | 20 | |||||||
| 12 | 18 | |||||||
| TMU-ZK40-30 | 5 | 32 | 40 | 32 | 3 | 2900 | 4 | 105 |
| 10 | 30 | |||||||
| 12 | 27 | |||||||
| TMU-ZK50-20 | 12 | 22 | 50 | 40 | 3 | 2900 | 4 | 130 |
| 20 | 20 | |||||||
| 25 | 17 | |||||||
| TMU-ZK50-30 | 12 | 32 | 50 | 40 | 3 | 2900 | 5.5 | 150 |
| 20 | 30 | |||||||
| 25 | 28 | |||||||
| TMU-ZK65-20 | 20 | 13 | 65 | 50 | 3.5 | 2900 | 5.5 | 150 |
| 30 | 20 | |||||||
| 35 | 18 | |||||||
| TMU-ZK65-30 | 20 | 32 | 65 | 50 | 3.5 | 2900 | 7.5 | 150 |
| 30 | 30 | |||||||
| 35 | 18 | |||||||
| TMU-ZK65-50 | 20 | 52 | 65 | 50 | 3.5 | 2900 | 15 | 280 |
| 30 | 50 | |||||||
| 35 | 47 | |||||||
| TMU-ZK65-80 | 15 | 82 | 65 | 50 | 4.5 | 2900 | 18.5 | 450 |
| 25 | 80 | |||||||
| 35 | 72 | |||||||
| TMU-ZK80-35 | 30 | 37 | 80 | 65 | 3.5 | 2900 | 15 | 260 |
| 45 | 35 | |||||||
| 55 | 30 | |||||||
| TMU-ZK80-20 | 35 | 22 | 80 | 65 | 4 | 2900 | 11 | 250 |
| 50 | 20 | |||||||
| 60 | 17 | |||||||
| TMU-ZK80-30 | 35 | 32 | 80 | 65 | 3.5 | 2900 | 15 | 250 |
| 50 | 30 | |||||||
| 60 | 25 | |||||||
| TMU-ZK80-50 | 35 | 52 | 80 | 65 | 4 | 2900 | 18.5 | 280 |
| 50 | 50 | |||||||
| 55 | 45 | |||||||
| TMU-ZK80-80 | 35 | 82 | 80 | 65 | 5 | 2900 | 18.5 | 540 |
| 50 | 80 | |||||||
| 60 | 72 | |||||||
| TMU-ZK100-35 | 50 | 37 | 100 | 80 | 4 | 2900 | 18.5 | 345 |
| 60 | 35 | |||||||
| 80 | 30 | |||||||
| TMU-ZK100-50 | 50 | 52 | 100 | 80 | 4 | 2900 | 22 | 380 |
| 60 | 50 | |||||||
| 70 | 45 | |||||||
| TMU-ZK100-40 | 70 | 45 | 100 | 80 | 4 | 2900 | 30 | 440 |
| 100 | 40 | |||||||
| 110 | 35 | |||||||
| TMU-ZK125-28 | 70 | 32 | 125 | 100 | 5 | 2900 | 30 | 400 |
| 140 | 28 | |||||||
| 150 | 22 | |||||||
| TMU-ZK150-30 | 120 | 34 | 150 | 125 | 4 | 1450 | 45 | 840 |
| 250 | 30 | |||||||
| 300 | 26 | |||||||
| TMU-ZK200-25 | 240 | 28 | 200 | 150 | 5.5 | 1450 | 75 | 1180 |
| 400 | 25 | |||||||
| 500 | 20 | |||||||
| TMU-ZK200-32 | 240 | 39 | 200 | 150 | 5.5 | 1450 | 75 | 1180 |
| 400 | 32 | |||||||
| 500 | 26 | |||||||
| TMU-ZK250-32 | 480 | 35 | 250 | 200 | 7.4 | 1450 | 132 | 1680 |
| 800 | 32 | |||||||
| 960 | 28 | |||||||
| TMU-ZK250-50 | 480 | 53 | 250 | 200 | 7.6 | 1450 | 200 | |
| 800 | 50 | |||||||
| 960 | 46 | |||||||
| TMU-ZK300-32 | 760 | 35 | 300 | 250 | 9.5 | 1450 | 200 | |
| 1200 | 32 | |||||||
| 1440 | 28 | |||||||
| TMU-ZK300-50 | 760 | 53 | 300 | 250 | 9.6 | 1450 | 315 | |
| 1200 | 50 | |||||||
| 1440 | 46 | |||||||
| TMU-ZK350-32 | 1100 | 35 | 350 | 350 | 6.7 | 1450 | 250 | |
| 1600 | 32 | |||||||
| 1920 | 27 | |||||||
| TMU-ZK350-50 | 1100 | 53 | 350 | 350 | 6.7 | 1450 | 400 | |
| 1600 | 50 | |||||||
| 1920 | 45 | |||||||
| TMU-ZK400-30 | 1000 | 35 | 400 | 350 | 6.2 | 980 | 280 | 4000 |
| 1500 | 30 | |||||||
| 2000 | 23 | |||||||
| TMU-ZK500-20 | 3000 | 25 | 500 | 500 | 7.1 | 735 | 350 | 5200 |
| 3600 | 20 | |||||||
| 3800 | 18 | |||||||
| TMU-ZK500-50 | 1600 | 60 | 500 | 450 | 7.1 | 980 | 500 | 5000 |
| 2500 | 50 | |||||||
| 1825 | 25 | |||||||
| TMU-ZK600-20 | 2500 | 27 | 600 | 500 | 6.4 | 585 | 315 | 6500 |
| 2400 | 17 | |||||||
| 3600 | 20 | |||||||
| TMU-ZK600-30 | 4000 | 33 | 600 | 500 | 7.2 | 735 | 750 | 6500 |
| 4500 | 30 | |||||||
| 5000 | 26 | |||||||
| TMU-ZK600-50 | 2500 | 55 | 600 | 500 | 6.4 | 735 | 750 | 6500 |
| 3000 | 50 | |||||||
| 3700 | 40 |
安装示意图
