Meaning	TCLF50-160
T	Code of enterprise
C	Magnetic driven
L	Vertical
F	Fluoroplastic
50	The inlet dia is 50mm
160	Nominal dia of impeller is 160mm

一、Product Introduction：

Product overview:
No leakage of fluorine magnetic pump (referred to as: magnetic pump) is the application of modern magnetic mechanics principle, a new type of pump contact without the use of magnetic drive torque of the permanent magnet, which is driven by the motor outer rotor (i.e. outer magnet) assembly rotates, the magnetic field through the magnetic field lines through the isolation sleeve to drive the inner rotor (i.e. the magnet assembly) and synchronous rotating impeller, the medium enclosed in static Isolation Kit, so as to achieve the purpose of pumping medium without leakage, completely solve the seal mechanical pump leakage pump with new industrial design full seal, no leakage, no pollution, high efficiency and energy saving performance. To meet international standards, can replace the expensive imported chemical pump.
Features:
1. TCLF no-leakage fluorine lining magnetic pipeline pump is the newest type non-leakage pipeline centrifugal pump, designed voluntarily according to TCF series, which both has advantages of pipeline centrifugal pump and magnetic driven pump.
2. The whole pump body be sintered and pressed of cast-iron with fluorine lining (PTFE, FEP, and PEA). The flowing-passed components like pump body, impeller, pump cover are entirely pressed and sintered of fluoroplastic (PTFE, FEP, PFA) covering metal insert.
3. Fluoroplastic (PTFE, FEP and PFA) is the most superior anti-corrosive materials in the nowadays world, be free from corrosive medium of any concentration of acid, lye, oxidants, etc.
4. New type permanent magnet with good magnetism, high temperature resistant and No demagnetization is selected.
5. Shaft sleeve, sleeve bearings be made of graphite and PTFE material with good characteristic of superior wear resistance and high temperature resistance, lubrication groove setting, which guarantee the pump’s working life.
6. Enclosed static seal completely solves the problem of dielectric leakage.
7. No need of independent lubrication and cooling water, reducing energy consumption.
8. Direct coupling pull back design, No need to dismount pipe, easier maintenance.
9. Vertical mount, compact structure, low voice, small vibration, small occupation and stable operation.
10. No contact and no friction, change coupling transmission to synchronic pulling. Power consumption of small, high efficiency, and has a damping effect, reducing vibration on the pump motor and pump in the effects of cavitations vibration when the impact of the motor.
Application: Widely applied to many fields or processes like petroleum, chemical, acid, alkali, rare earth, smelting, pesticides, dyes, medicine, paper making, electroplate, electrolysis, acid pickling, radio, formed foil, research organizations and national defense, etc. Particularly be applicable to delivery medium of flammable, explosive, volatile, toxic, strong acid and alkali, organic solvents and other expensive liquids, etc.
Performance range：Design pressure：1.6Mpa、Flow:2-100m3/h、Head：12-50m、Power：1.1-30kw
Applicable temperature：-50～160℃
The optional accessories：preventive idling device, monitoring of temperature device, monitoring of leakage device
NOTES：Please indicate during ordering if the porportion of medium is largger than 1.3mg/cm3.No idling running. No delivering medium with particles or crystalline.

二、Structure drawing：

 

三、Performance Curve：

Part	Material	Part	Material	Part	Material
1.Plate	HT200/lined F46	8.Pump shaft	SIC	15.Inner rotor assembly	HT200/lined F46/permanent magnetic
2.Pump body	HT200/lined F46	9.Bearing	Filled with F4	16.Outer rotor assembly	HT200/lined F46
3.Impeller nut	HT200/lined F46	10.Pump cover	HT200/lined F46	17.Connection	HT200
4.Impeller	Fluoroplastic alloy	11.Distance sleeve assembly	1Cr19Ni9Ti/PEEK/PTFE	18.Motor	Per client request

 

四、Performance data sheet：

model	Rotating speed r/min	flow m3/h	Head m	effectiveness ％	NPSH m	Import X export mm	power kw	weight kg
TCL25-125	2900	1.5	22	18	2.5	25×20	1.1	27
		2	20	20	2.5
		3.2	18.5	24	3
TCL25-160	2900	1.5	34.3	19	2.5	25×20	1.5	36
		2	32	22	2.5
		3.2	29.6	25	3
TCL25-200	2900	1.5	52.5	18	2.5	25×20	3	51
		2	50	20	2.5
		3.2	48	22	3
TCL25-250	2900	1.5	82	12	2.5	25×20	7.5	63
		2	80	18	2.5
		3.2	78.5	26	3
TCL32-125	2900	2	22	20.5	2.5	32×20	1.5	30
		3.2	20	20	2.5
		5.5	18.5	18	3
TCL32-160	2900	2	34.3	20.5	2.5	32×20	2.2	35
		3.2	32	20	2.5
		5.5	29.6	18	3
TCL32-200	2900	2	52.5	32	2.5	32×20	4	61
		3.2	50	36	2.5
		5.5	48	34	3
TCL32-250	2900	2	82	26	2.5	32×20	7.5	75
		3.2	80	30	2.5
		5.5	78.5	28	3
TCL40-125	2900	4.4	22	16	2.5	40×25	1.5	35
		6.3	20	20	2.5
		8.3	18.5	23	3
TCL40-160	2900	4.4	34.3	30	2.5	40×25	3	40
		6.3	32	31	2.5
		8.3	29.6	32	3
TCL40-200	2900	4.4	52.5	26	2.5	40×25	5.5	66
		6.3	50	33	2.5
		8.3	48	32	3
TCL40-250	2900	4.4	82	24	2.5	40×25	11	95
		6.3	80	28	2.5
		8.3	78.5	28	3
TCL50-125	2900	7.5	22	43	2	50×32	2.2	44
		12.5	20	51	2
		15	18.5	49	2.5
TCL50-160	2900	7.5	34.3	35	2	50×32	3	61
		12.5	32	47	2
		15	29.6	47	2.5
TCL50-200	2900	7.5	52.5	28	2	50×32	7.5	113
		12.5	50	40	2
		15	48	48	2.5
TCL50-250	2900	7.5	82	23	2	50×32	11	180
		12.5	80	33	2
		15	78.5	36.5	2.5
TCL65-125	2900	15	21.8	46	2	65×50	3	80
		25	20	56	2
		30	18.5	65	2.5
TCL65-160	2900	15	35	46	2	65×50	5.5	97
		25	32	56	2
		30	30	65	2.5
TCL65-200	2900	15	53	34	2	65×40	11	120
		25	50	46	2
		30	47	50	2.5
TCL65-250	2900	15	82	33	2	65×40	18.5	203
		25	80	48	2
		30	78	50	2.5
TCL65-315	2900	15	127	28	2.5	65×40	30	345
		25	125	39	2.5
		30	123	42.5	3
TCL80-125	2900	30	22.5	52	3	80×65	5.5	125
		50	20	65	3
		60	18	70	3.5